1、裝載機變速操縱桿位于方向盤左下方,操作時練習者必須以左手操縱,而汽車操縱桿在練習者座位右側,使小型裝載機初學者習慣性的認為先右手操縱方向盤再換下左手操縱變速桿,有時錯誤的直接用右手操縱變速桿.此外,裝載機作業時要求左手操縱方向盤和變速桿,右手操縱工作裝置操縱桿,這需要初學者在練習時細心、忙而不亂，逐漸提高。
The shift lever is located in the bottom left of the steering wheel loaders, when operating practitioners must be manipulated to his left hand, while on the right joystick practitioners car seat,make small loaders beginners habitual thought the steering wheel to the right and then the left-hand steering gear replaced bar, sometimes the wrong lever manipulated directly with the right hand.in addition, the requirements of the steering wheel and shift lever left when the loader job right joystick to manipulate the working device, which requires careful during practice for beginners,

busy but not chaotic, and gradually increased.

2、山東裝載機作業時油門踏板與工作裝置操縱桿之間配合的好壞,將直接影響作業效率和燃料消耗多少，初學者很難掌握這一點,練習時往往造成很大的燃料消耗和機械的損壞,不管教練如何詳細講解操作要領,初學者操作時還是會不知所措。
When the job fit between the accelerator pedal and work equipment lever Shandong loaders good or bad, will directly affect the number of operating efficiency and fuel consumption, it is difficult to grasp for beginners, often resulting in considerable fuel consumption and mechanical damage during exercise no matter how elaborate the coach operating essentials, beginners will still operate at a loss.

3、理論要求裝載機作業時升動臂、轉鏟斗加油門、松鏟斗不加油門;機械距料堆1-2m時減速、調整鏟刀緩緩插入料堆,根據料堆的松散或堅硬程度來決定油門的大小和升降動臂(鏟斗)的多少。
Theory requires job-liter boom loaders, turn the bucket fuel door, pine bucket without refueling door; when the machinery from the windrow 1-2m deceleration, adjust the blade slowly insert pile,loose or hard according to the extent of the stockpile to determine the size and number of lifting boom (bucket) of the throttle.