山東裝載機http://m.hdwzhs.com/的維修過程中使用的化學物質主要是油料，焊接過程中產生的氣體也會危害維修人員的健康。為避免化學物質的傷害，應該采取哪些措施呢？
　　
1、優先采用污染小、傷害低的油料，裝載機維修人員要詳細了解各種油料的特性、危害機理、致病方式，并采取相應的防范措施。根據需要備好相應的防護裝備和用品。維修人員在接觸滲透性強的液壓油、潤滑油時，應戴上橡膠手套和護目鏡；使用煤油、汽油等揮發性較強的油，應注意防火并配備滅火設備。
Give priority to pollution, low damage of fuel, loaders maintenance personnel to learn more about the characteristics of various oil and damage mechanism of pathogenicity way, and take appropriate precautions. According to prepare appropriate protective needed equipment and supplies. Maintenance personnel in contact with strong penetration of hydraulic oil, lubricating oil, should wear rubber gloves and goggles; use kerosene, gasoline and other volatile strong oil, should pay attention to fire prevention and fire suppression equipment.
　　
2、要盡量選擇無污染或少污染的維修及加工工藝，如機加工中可采用干磨削和干銑削，減少油液和乳化液的使用，對產生的廢棄物要進行分類，對廢水、廢油、廢渣應采取分離凈化處理措施。
To try to choose a non-polluting or less polluting maintenance and processing technology, such as machining in dry grinding and dry milling can reduce the use of oil and emulsion of waste generated should be classified, wastewater, waste oil , waste separation purification treatment measures should be taken.

3、通過對小型裝載機運行的跟蹤檢查，有計劃地停機，做好變速箱的保養和修理安排，防止主要機械故障和與之相關的零部件損壞，在故障萌發之前就進行修理，以節約大量維修成本，使整機零部件具有較長的使用壽命，提高設備機臺效益，保持良好的工作性能。
Through the small loaders running track inspection, there are plans to shut down, good gearbox maintenance and repair arrangements to prevent major mechanical failures and associated parts damage,malfunction before germination can be repaired in order to save a lot of maintenance cost, so that machine parts have a longer service life, improve equipment machine efficiency, maintain good performance.

山東裝載機：http://m.hdwzhs.com/