裝載機運動部件有時候很容易造成傷害，這樣會影響裝載機的使用性能，下面永保機械的專家就給大家詳細分析一下山東裝載機運動部件如何防止傷害？

1、裝載機凡易造成傷害事故的運動部件均應封閉或屏蔽，或采取其他避免操作人員接觸的防護措施。
The moving parts of the Shandong loader which are easy to cause injury accident should be closed or shielded, or take other protective measures to avoid contact with the operator.

2、以裝載機操作人員所站立平面為基準，凡高度在2m以內(nèi)的各種傳動裝置必須設防護裝置，高度在2m以上的物料輸送裝置和皮帶傳動裝置應設防護裝置。
In Shandong loading machine operators stand plane as a reference, where the height of less than 2m drive devices must be set protective device, highly in 2M above the material conveying device and a belt driving device, protection device should be located.

3、為避免裝載機擠壓傷害，直線運動部件之間或直線運動部件與靜止部件包括墻、柱之間的距離，必須符合有關安全距離的規(guī)定，機械設計應保證不該通過的身體部位不能通過。
In order to avoid Shandong loader extrusion injury, linear motion between components or linear motion and stationary components including the distance between walls and columns, must comply with the provisions of the relevant safety

distance and mechanical design should be guaranteed by the through parts of the body can not.

4、裝載機應根據(jù)需要設置可靠的限位裝置，機械設備必須對可能因超負荷發(fā)生損害的部件設置超負荷保險裝置，高速旋轉的運動部件應進行必要的靜平衡或動平衡試驗。
Shandong loader should be set up according to the needs of reliable limit device, mechanical equipment must be in May due to overload occurs component damage settings overload safety device, high-speed rotation of the moving parts should be necessary static balance and dynamic balance test.