在日常中對裝載機的保養是很有必要的，有時候可以減少一些不必要的安全隱患，下面小編就為大家簡單介紹一下裝載機常見故障及原因。In the daily maintenance of the Shandong loader is very necessary, and sometimes can reduce some unnecessary security risks, the following Xiaobian for everyone to briefly introduce the common fault and cause of the Shandong loader.

1.裝載機掛擋時，不能順利進入擋位的原因有。壓力閥壓力過低；液壓泵工作不良，密封不好；液壓管路堵塞；離合器密封圈損壞、泄露；掛擋閥桿不到位。The reason why the Shandong loader can not get into the gear when it is hanging. The pressure of the pressure valve is too low; the hydraulic pump is not working well, and the sealing is not good; the hydraulic pipeline is blocked; the sealing ring of the clutch is damaged and leaked; the valve rod is not in place.

2.變速箱變速時，擋位脫不開的原因有。裝載機活塞環脹死；離合器摩擦片燒毀；離合器回位彈簧失效或損壞；回油管路堵塞。Gear shift, the gear can not be separated from the reasons for. The piston ring of the loader in Shandong is dead; the clutch friction plate is burnt out; the return spring of the clutch is invalid or damaged.

3.已掛上擋，但裝載機運行乏力，甚至不能行走的原因有。摩擦片磨損嚴重，間隙過大；離合器自動倒空閥密封不嚴，使壓力下降；換擋操縱閥管路堵塞；切斷閥不能回位；變速閥定位彈簧疲勞或折斷，鋼球跳動；離合器活塞環，密封圈磨損嚴重，使泄露嚴重。Has been put on the block, but the Shandong loader operation is weak, and even can not walk for the reasons. Friction wear, the gap is too large; the clutch automatic emptying valve seal, the pressure drop; the shift control valve pipe blockage; shut-off valve can not return; variable valve positioning spring fatigue or fracture, ball beating; clutch piston ring, the sealing ring wear serious, so serious leakage.

裝載機常見故障及原因就為大家簡單介紹這些了，我公司知名的裝載機廠家之一，歡迎大家前來選購，更多內容請大家繼續關注我們的網站或者直接聯系我們。Shandong loader common fault and the reasons we introduce these, our company well-known Shandong loader is one of the manufacturers, welcome everyone to come to buy more content, please continue to pay attention to our website or contact us directly.