一、井下裝載機的特點

1、采用鉸接式車架,轉彎半徑小,機動靈活,便于在狹窄低矮場地作業.
Articulated frame, small turning radius, flexible, easy low in narrow space operations.
2、工作裝置經計算機優化設計其結構更合理,具有強勁的鏟掘力和較短的作業循環時間,工作效率更高.
Working device via computer optimized design of its structure is more reasonable and shovel with a strong force and shorter operating cycle time, work more efficiently.
3、采用液力機械傳動，能充分利用發動機的功率,增大扭矩使整機具有較大的牽引力同時還能適應外界阻力變化而自動無級變速,在充分提高發動機使用效率的同時延長傳動機件和發動機的使用壽命.
Using hydraulic mechanical transmission, can make full use of engine power, increased torque so that the machine has a greater resistance to traction while to adapt to changes in the outside world continuously variable automatic, fully improve engine efficiency while extending the use and transmission parts engine life.
4、采用負荷傳感、優先轉向的分合流液壓系統、動力換擋變速,整機操縱輕便靈活、動作平穩可靠.
With load sensing priority sub-confluent hydraulic steering system, power shift transmission, machine manipulation of light and flexible, stable and reliable action.
5、采用低壓寬基工程機械輪胎,后橋擺動,具有良好的越野和通過性能,適應崎嶇不平的路面上行駛和作業.
Using low wide base OTR tire, rear axle swing, with good off-road and through the performance, adapt to driving and operating on a bumpy road.
6、可拆卸駕駛棚,視野寬闊,為操作者提供安全舒適的工作條件.
Removable canopy, wide field of vision, to provide a safe and comfortable working conditions for the operator.

二、山東井下裝載機的維護
1.下坡時嚴禁發動機熄火及掛空擋溜坡，動臂下嚴禁站人，當機器運動時，機子中間鉸接處嚴禁站人，否則將發生嚴重傷亡事故。
Turn off the engine when going downhill non-slip slope and neutral gear, forbidden to stand under the boom, when the movement of the machine, the machine is prohibited to stand at the middle of the hinge, otherwise serious injury or death.
2.維護修理機器前在啟動開關或操縱桿上掛“不能工作”警告標志，穿戴工作條件要求的衣服等防護品，不準穿戴松衣服或飾物避免鉤在機器的控制桿上。檢查防護板、蓋板的固定，機器上不得堆放與機子無關的雜物。
Maintenance and repair machine before the start switch or joystick hanging "does not work" warning signs, working conditions required to wear protective clothing and other goods, are not allowed to wear loose clothing or jewelry to avoid the hook in the control lever of the machine. Check the fenders, and the machine may not be unrelated to the debris piled on the cover of the fixed

machine.